Corrosion Behavior of Recycling Al- Alloy Based Metal Matrix Composites Reinforced by Nano particles
https://doi.org/10.24017/science.2017.3.49
Abstract views: 1053 / PDF downloads: 912Abstract
The present work aims to preparation and investigation of the corrosion behavior of recycling Al alloy based metal matrix composite reinforced with nano SiC with weight percentage (2%, 4%, 6%, and 8%) and particle size 52 nm were evaluated. The composites were fabricated using liquid metallurgy (stir casting process). The corrosion rates of composites were calculated using potentiostatic measurements in 3.5% NaCl solution.. The results showed that Al/SiC nanocomposites have higher corrosion resistance than aluminum matrix.The corrosion resistance was found to be increased by increasing of the weight percentage of the nanoparticles The Al/8% nano (SiC)P composites exhibited the highest corrosion resistance among all the investigated nanocomposites. The microstructure indicate that the strong interfacial bonding between the matrix alloy and reinforcement.
Keywords:
Recycling Al, Nano SiC Particles, Metal Matrix Composite, Stir casting, Corrosion Resistance & Potentiostatic Measurements.
References
[1] C. N. Chawla, "Metal-matrix composites in ground transportation". JOM, 58, 67-70, 2006.
https://doi.org/10.1007/s11837-006-0231-5
[2] A.i, H. Saebnouri, E.; Sadrnezhaad, S.K.; Ghanbari, M.; Shahrabi, T. "Processing and surface properties of Al-AlN composites produced from nanostructured milled powders." J. Alloy. Compd., 490, 624-630,2010.
https://doi.org/10.1016/j.jallcom.2009.10.121
[3] Z. Zhang.; D.L. Chen, "Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites.", Mat. Sci. Eng. A, 483-484, 148-152, 2008.
https://doi.org/10.1016/j.msea.2006.10.184
[4] Z. Zhang.; D.L. Chen, "Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites": A model for predicting their yield strength. Scripta Mater., 54, 1321-1326, 2006.
https://doi.org/10.1016/j.scriptamat.2005.12.017
[5] P. Luo, M. Donald, D.T.; W. Xu,; Palanisamy, S.; Dargusch, M.S.; Xia. K. "A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing",. Scripta Mater., 66, 785-788, 2012.
https://doi.org/10.1016/j.scriptamat.2012.02.008
[6].P. C. R Nunes and L. V. Ramanathan, "Corrosion Behaviour of Alumina-Aluminum and Silicon Carbide-Aluminum Metal Matrix Composites", Corrosion Science, Vol. 51, No. 8, pp. 610-617, 1995.
https://doi.org/10.5006/1.3293621
[7] M. Singla, D. Deepak D., L. Singh, Vikas Chawla, "Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite", Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No.6, pp.455-467, 2009.
https://doi.org/10.4236/jmmce.2009.86040
[8] G. M. Pinto, J. h Nayak, A N. Shetty, "Corrosion Behaviour of 6061 Al - 15vol. Pct. SiC Composite and its Base Alloy in a Mixture of 1:1 Hydrochloric and Sulphuric Acid Medium", J. Electrochem. Sci., 4 , pp. 1452 - 1468, 2009.
[9] H. M. Zakaria, "Microstructural and corrosion behavior of Al/SiC metal matrix composites", Ain Shams Engineering Journal, Volume 5, Issue 3, September 2014, p.p 831-838
https://doi.org/10.1016/j.asej.2014.03.003
[10] B.Babu,S.K.Karthikeyan,V.Adithya,"Experimental Investigation and Analysis of Corrosion and Hardness using Aluminium Composites", International Journal of Latest Trends in Engineering and Technology, (IJLTET), ISSN: 2278-621X, Vol. 4 Issue 4 November 2014.
[11] K. K. Alaneme, A. F. Babajide, A. J. Omotoyinbo, Joseph O. Borode, M. O. Bodunrin, "Corrosion and wear behavior of stir-cast aluminium-based hybrid composites reinforced with silicon carbide and corn cob ash", African Corrosion Journal, Official publication of the Corrosion Institute of Southern Africa, Vol.1, No.2, 2015.
[12] M. K. Aravindan & K. Balamurugan, "Tribology And Corrosion Behavior Of AL 6063/SiC Metal Matrix Composits", International Journal of Advanced Engineering Technology, E-ISSN 0976-3945, Vol. VII/Issue II/April-June, 2016.
[13] P.R. Roberge, "Corrosion Engineering: Principles and Practice", New York: McGraw-Hill., 2008.
[14] P.S. S. R. Kumar, D.S. Robinson Smart, S. J.Alexis, "Corrosion behaviour of Aluminium Metal Matrix reinforced with Multi-wall Carbon Nanotube", Journal of Asian Ceramic Societies 5 (2017).
https://doi.org/10.1016/j.jascer.2017.01.004
https://doi.org/10.1007/s11837-006-0231-5
[2] A.i, H. Saebnouri, E.; Sadrnezhaad, S.K.; Ghanbari, M.; Shahrabi, T. "Processing and surface properties of Al-AlN composites produced from nanostructured milled powders." J. Alloy. Compd., 490, 624-630,2010.
https://doi.org/10.1016/j.jallcom.2009.10.121
[3] Z. Zhang.; D.L. Chen, "Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites.", Mat. Sci. Eng. A, 483-484, 148-152, 2008.
https://doi.org/10.1016/j.msea.2006.10.184
[4] Z. Zhang.; D.L. Chen, "Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites": A model for predicting their yield strength. Scripta Mater., 54, 1321-1326, 2006.
https://doi.org/10.1016/j.scriptamat.2005.12.017
[5] P. Luo, M. Donald, D.T.; W. Xu,; Palanisamy, S.; Dargusch, M.S.; Xia. K. "A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing",. Scripta Mater., 66, 785-788, 2012.
https://doi.org/10.1016/j.scriptamat.2012.02.008
[6].P. C. R Nunes and L. V. Ramanathan, "Corrosion Behaviour of Alumina-Aluminum and Silicon Carbide-Aluminum Metal Matrix Composites", Corrosion Science, Vol. 51, No. 8, pp. 610-617, 1995.
https://doi.org/10.5006/1.3293621
[7] M. Singla, D. Deepak D., L. Singh, Vikas Chawla, "Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite", Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No.6, pp.455-467, 2009.
https://doi.org/10.4236/jmmce.2009.86040
[8] G. M. Pinto, J. h Nayak, A N. Shetty, "Corrosion Behaviour of 6061 Al - 15vol. Pct. SiC Composite and its Base Alloy in a Mixture of 1:1 Hydrochloric and Sulphuric Acid Medium", J. Electrochem. Sci., 4 , pp. 1452 - 1468, 2009.
[9] H. M. Zakaria, "Microstructural and corrosion behavior of Al/SiC metal matrix composites", Ain Shams Engineering Journal, Volume 5, Issue 3, September 2014, p.p 831-838
https://doi.org/10.1016/j.asej.2014.03.003
[10] B.Babu,S.K.Karthikeyan,V.Adithya,"Experimental Investigation and Analysis of Corrosion and Hardness using Aluminium Composites", International Journal of Latest Trends in Engineering and Technology, (IJLTET), ISSN: 2278-621X, Vol. 4 Issue 4 November 2014.
[11] K. K. Alaneme, A. F. Babajide, A. J. Omotoyinbo, Joseph O. Borode, M. O. Bodunrin, "Corrosion and wear behavior of stir-cast aluminium-based hybrid composites reinforced with silicon carbide and corn cob ash", African Corrosion Journal, Official publication of the Corrosion Institute of Southern Africa, Vol.1, No.2, 2015.
[12] M. K. Aravindan & K. Balamurugan, "Tribology And Corrosion Behavior Of AL 6063/SiC Metal Matrix Composits", International Journal of Advanced Engineering Technology, E-ISSN 0976-3945, Vol. VII/Issue II/April-June, 2016.
[13] P.R. Roberge, "Corrosion Engineering: Principles and Practice", New York: McGraw-Hill., 2008.
[14] P.S. S. R. Kumar, D.S. Robinson Smart, S. J.Alexis, "Corrosion behaviour of Aluminium Metal Matrix reinforced with Multi-wall Carbon Nanotube", Journal of Asian Ceramic Societies 5 (2017).
https://doi.org/10.1016/j.jascer.2017.01.004
Downloads
How to Cite
[1]
N. J. Abdulkader, N. S. Jasim, and F. A. Hashim, “Corrosion Behavior of Recycling Al- Alloy Based Metal Matrix Composites Reinforced by Nano particles”, KJAR, vol. 2, no. 3, pp. 279–283, Aug. 2017, doi: 10.24017/science.2017.3.49.
Article Metrics
Published
27-08-2017
Issue
Section
Pure and Applied Science
